Rep Login  
Search
Products
b1 Airflow Sensing Elements
b1 Pressure Sensing Elements
b1 Flow Transducers
b1 Differential Pressure Transducers
b1 Indicating Meters
b1 Calibration Tools
 
 
 
Flow Transducers
MicroTrans Airflow Signal Processor
 
 
The MicroTrans signal processor utilizes current state-of-the-art digital microprocessor technology capable of producing overall ±0.1% accuracy with unequaled 20-bit (1,048,576 steps) A/D and 12 bit (4,096 steps) D/A signal conversion resolution. Having a twelve-point linearization capability, the MicroTrans can accurately determine true airflow rates even when the primary airflow measurement stations do not meet their minimum installation requirements. The ultra low 0.04"w.c. differential pressure, 800 fpm full scale operating ranges and the auto zeroing function of the MicroTrans provides accurate airflow measurement down to 100 fpm. The MicroTrans accepts a temperature input signal for air density compensation for standard or actual airflow calculations.
b2
FT & FIT-1001 Series Air Volume/Velocity Transducers
 
 
FT & FIT-1001 Series are analog two wire differential pressure transducers with a square root extractor, scaling multiplier, and output filter complete in a single package. The 4-20 mA output of the transducers is linear to velocity or volume. Each transducer is factory spanned and calibrated to meet the design requirement of the application and flow measuring elements being served. Optional features include local indication of the measured process air velocity and/or volume on either a 0.5 inch high 3-1/2 digit LCD display meter scaled in cfm (Model FIT-1001-D) or an independent front panel mounted magnehelic pressure gauge scaled in both cfm and fpm (Model FIT-1001-M), and a built-in three-way manual zeroing valve for ease of zero verification and calibration (Models FT-1001-ZV, FIT-1001-DZV, and FIT-1001-MZV).
b2
b2
b2
b2
b2
b2
FT & FIT-1003 Series Air Volume/Velocity Transducers
 
 
FT & FIT-1003 Series are analog three wire differential pressure transducers with a square root extractor, scaling multiplier, and output filter complete in a single package. The 0-5 or 0-10 VDC output of the transducers is linear to velocity or volume. Each transducer is factory spanned and calibrated to meet the design requirement of the application and flow measuring elements being served. Optional features include local indication of the measured process air velocity and/or volume on either a 0.5 inch high 3-1/2 digit LCD display meter scaled in cfm (Model FIT-1003-D) or an independent front panel mounted magnehelic pressure gauge scaled in both cfm and fpm (Model FIT-1003-M), and a built-in three-way manual zeroing valve for ease of zero verification and calibration (Models FT-1003-ZV, FIT-1003-DZV, and FIT-1003-MZV).
b2
b2
b2
b2
b2
b2
FT & FIT-1005 Series Air Volume/Velocity Transducers
 
 
FT & FIT-1005 Series are analog four wire differential pressure transducers with a square root extractor, scaling multiplier, and output filter complete in a single package. The 4-20 mA, 0-5 VDC, or 0-10 VDC selectable output of the transducers is linear to velocity or volume. Each transducer is factory spanned and calibrated to meet the design requirement of the application and flow measuring elements being served. Optional features include local indication of the measured process air velocity and/or volume on an independent front panel mounted magnehelic pressure gauge scaled in both cfm and fpm (Model FIT-1005-M), and a constant volume purge feature that prevents contaminants from migrating to the differential pressure sensor (Model FIT-1005-MCP).
b2
b2
b2
b2
 
 
 
 
 
 
 
 
 
 
 
ABOUT
Theory of Operation
 
ABOUT
Installation Guidelines
 
 
ABOUT
Airflow Measurement Accuracy